Mua iCapp, mua rhinoreverse bản quyền | Đại lý & nhà phân phối iCapp, rhinoreverse | Mua bán phần mềm iCapp, rhinoreverse bản quyền tại Việt Nam - PACISOFT Vietnam
 hcm@pacisoft.com
 Hotline HCM 9:00-17:00 
(028) 36 229 885
 hanoi@pacisoft.com
 Hotline HÀ NỘI 9:00-17:00
(024) 32 028 112

iCapp

Giới thiệu iCapp

iCapp GmbH được thành lập vào tháng 2 năm 2000 bởi Tiến sĩ Stefan Schmälzle và Tiến sĩ Jörg Danzberg. Nền tảng kinh doanh cốt lõi của chúng tôi bao gồm phát triển phần mềm để thiết kế và mô hình hóa các bề mặt dạng tự do. Để tận dụng các cuộc thi của chúng tôi, NURBS-math và các công nghệ hình thành, chúng tôi tập trung vào hai thị trường:

Face model of the outer side panel for Porsche with the basic solids of the trimming dies1. Công cụ chế tạo thân xe

Sử dụng phần mềm PanelShop của chúng tôi, người dùng được kích hoạt để tự động tính toán các mặt bù lớn hoặc khuôn cắt tỉa phức tạp (xem Hình 1) để thiết kế. Flanches sẽ được thư giãn và philê làm tròn không tham số sẽ được truyền lại trong khuôn mặt sắc nét. Khách hàng là các OEM của ngành công nghiệp ô tô cũng như các nhà cung cấp của họ.

 

 

Reconstructed faces based on measured points2. Thiết kế và kỹ thuật

 Các phương pháp nhanh mới để tính gần đúng khuôn mặt đã được phát triển để giải quyết các yêu cầu điển hình của các nhiệm vụ kỹ thuật đảo ngược. Một phần mềm allone đứng thoải mái và một trình cắm tiết kiệm chi phí cho Rhinozeros hiện có sẵn. Chúng tôi đã giải quyết phần mềm dễ sử dụng của chúng tôi cho các công ty vừa và nhỏ.

Ý tưởng kinh doanh của chúng tôi đã được đánh giá cao bởi cuộc thi Businessplan "Venture 2000" (McKinsey, ETH Zürich) và "Giải thưởng Công nghệ Thụy Sĩ 2001" (một số bang Thụy Sĩ).

Giới thiệu rhinoreverse

rhoreverse là một plug-in tích hợp cho trình tạo mô hình 3D NURBS, Rhinoceros©. rhoreverse giúp tạo bề mặt NURBS từ mesh data.

Bắt đầu bằng cách phác thảo các đường cong trên lưới. Sau đó, tê giác sẽ tự động lắp các bề mặt NURBS vào lưới. Xem phim hoặc video hướng dẫn bằng tiếng Anh, tiếng Đức hoặc tiếng Ý để có ấn tượng.

rhoreverse có khả năng độc đáo để thể hiện các hình dạng phức tạp lớn chỉ bằng một vài bề mặt NURBS bằng cách tạo các bề mặt có 2, 3, 4 hoặc nhiều cạnh.

rhinoreverse also improves Rhino's ability to:

• Import and display large meshes. (up to 1 million and more polygons)
• Quick draw and edit surface boundaries on the mesh
• Control continuity and tolerance between the NURBS faces
• Powerful healing of NURBS models by adjusting faces and face boundaries
• Fill holes in NURBS models within the given tolerances

This leads to a very simple and intuitive handling of complex mesh models in Rhino.

6 lý do nên dùng rhinoreverse

1. Ease of use

Arbitrary faces can be defined, to represent design intentions like feature lines very smoothly. The user only has to sketch a grid, containing boundary curves for all new faces (Figure 1 to 3). For this sketching procedure he only needs the mouse. The use of rhinoreverse™ is very intuitive and easy.  

1 STL-data
2 Sketched boundary curves
3 Resulting NURBS faces  

2. Innovative new algorithms to calculate and handle trimmed faces bring exceptional advantages.

Rhinoreverse™ generates trimmed faces. This procedure enables the user to define arbitrary faces by up to 25 boundary curves. Figure 4 shows such a typical trimmed face, highlighted in yellow, with more than 4 boundary curves. Decouplig the approximation routine from the sketched boundary curves improves the shape quality a lot. The shape of the faces is now only dependent from the shape of the given point mesh. To sketch the curves for the model shown in figure 1 we need today approx. 25 faces.

4 Joined surface model
5 Before boolean operation
6 After boolean operation

3. High face quality of the calculated multi face model enables solid modeling

 If the option "healing" is used, the transitions between calculated faces will be adjusted to Rhino´s current tolerance settings. This ensures, that the resulting face model can be used afterwards for solid operations or NC programming without any rework (fig. 5/6).

4. Fast skinning method

Additional option to rapidly create simplified faces, has been revised and improved. The goal is to represent point meshes quick-and-dirty with a small number of faces. The example in figure 8/9 shows the representation of the head by the use of only 4 NURBS-faces.  

8 Sketched boundary curves
9 Resulting NURBS faces

5. Technical Features

 • Several import interfaces for mesh data (*.stl, *.wrl, *.vrml, *.af, *.nas, *.txt)
• Simple sketching of boundary curves on the given mesh data by using the mouse
• Flexible definition of the faces by 2 to 25 boundary curves (former: 4 curves define one face)
• Optional mode, to skin the point mesh quick-and-dirty with a low number of faces
• Flexible use of arbitrary t-joins for local refinements
• Use of only one file (*.3dm) for saving all data
• Automatic calculation of topology by using graph algorithms
• Automatic approximation of start faces
• Robustness against small holes and sharp edges in the mesh
• Automatic recalculation of face transitions to Rhino´s tolerance settings
• Robustness against gaps in the point mesh
• Additional "healing"-function, to improve quality of already existing face models: Automatic elimination of small gaps, steps and overlaps
• Additional "relief"-function to cover large country surfaces
• Additional "patch"-function to fill holes and create surface blends

6. Additional special features

• Powerful "healing" algorithm - RRHeal
   Already existing NURBS-face models can be healed: Small gaps, steps and overlaps will be filled automatically. The goal is to improve data quality in order to enable solid-modeling and NC-milling.
• Relief surfaces - RRRelief
    In geography and architecture large relief surfaces are given in STL format. But for engineering tasks often NURBS face data are needed. To transform them, the method RRRelief was designed. This function works similar to Rhinos "drape" command.
    Advantages: The resulting NURBS face shows a homogenous distribution of control points. Also steep surface areas are processed well. The handling of large meshes is simple and fast.

10 Relief-STL & contour lines
11 Resulting spline face

• Patch command - RRPatch
    In order to create complex patches the function RRPatch was designed. The function works similar to Rhinos "patch" command.
    Advantages: The procedure allows to additional include design curves in order to define the inner shape of the patch. A robust interpolation scheme - which is tolerance based - enables to generate a face within Rhinos internal absolute tolerance. This ensures joinable faces and makes RRPatch easy to use: The user does not have to set lots of parameters. 
       
12 Wireframe model
13 Symmetry support
14 RRpatch: resulting face
15 Double mirrored face, joined
16 Zebra plot

Chính sách cấp phép

Full license: 1.290 $ Bản quyền vĩnh viễn.

Upgrade license: 645 $ từ rhinoreverse™ 2 lên rhinoreverse™ 3 Bản quyền vĩnh viễn.

Liên hệ MUA rhinoreverse bản quyền

Quý khách hàng vui lòng liên lạc chuyên viên tại HCM, HN và các tỉnh khác hoặc qua email sales@pacisoft.com với thông tin đầy đủ và số lượng sản phẩm để có báo giá tốt nhất. Cam kết mức giá cạnh tranh và hỗ trợ tuyệt vời. Hotline (024) 3915 6886 hoặc (028) 36100 816.

Không có sản phẩm phù hợp với lựa chọn.