Mua MITCalc bản quyền | Đại lý & nhà phân phối MITCalc | Mua bán phần mềm MITCalc bản quyền tại Việt Nam - PACISOFT Vietnam
 hcm@pacisoft.com
 Hotline HCM 9:00-17:00 
(028) 36 229 885
 hanoi@pacisoft.com
 Hotline HÀ NỘI 9:00-17:00
(024) 32 028 112

MITCalc

Giới thiệu MITCalc

MITCalc is a set of engineering, industrial, and technical calculations for your day-to-day routines. It will reliably, precisely, and most of all quickly guide you through the design of components, the solution of a technical problem, or a calculation of an engineering point without any significant need for expert knowledge.

MITCalc contains both design and check calculations of many common tasks, such as: spur gear (external, internal, gear rack), bevel and hypoid gear, worm gear, planetary gearing, timing belt, v-belt and chain drives, bearings, springs, beam, buckling, plates, shells, shaft, bolt connection, shaft connection, force couplings of shafts, pins, tolerances, tolerance analysis, welded connection, technical formulas and many others. You also have available many material, comparison, and decision tables, including a system for the administration of resolved tasks.

Description in PDF format: English version

MITCalc is an open system designed in Microsoft Excel to which you can make further modifications or user extensions without any programming skills.

You don’t have to learn MITCalc because you already know how to use it. The straightforward and fully comprehensive user interface with complex on-line help and the “expert notes” system will allow you to be more productive in just a few minutes.

MITCalc supports simple interconnection of individual parts between either each other, or your calculation, or tables. You can easily customize a solution to any special task you need.

MITCalc cooperates with many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, TurboCAD, BricsCAD, ZWCAD, ProgeCAD, Autodesk Inventor, SolidWorks, SolidEdge, Creo...). To draw a designed solution in 2D or insert correspondent 3D models and their assemblies is a matter of seconds.

Các sản phẩm của MITCalc

Calculations, tools and tables.

Beams, shafts, profiles

Straight beams with a constant cross-section
Shafts - design, deformation, strength test
Profiles - Static characteristics
Slender strut (column) buckling

Plates and shells

Plates
Shells

Toothing

Spur gear (external)
Spur gear (internal)
Spur gear (gear rack)
Bevel and hypoid gear
Worm gear
Planetary gear
Design of a transmission ratio

Belts and chains

V-belts
Toothed belts
Roller chains
Transmission using multiple pulleys/sprocket wheels

Bearings

Roller bearings I - SKF
Roller bearings II - Inch
Roller bearings III - INA, FAG

Tolerances, tolerancing

Tolerances
Tolerance analysis of linear, 2D and 3D dimensional chains

Connections

Bolted connection
Coupling of shafts using a key, grooving
Force couplings of shafts with hubs
Pins and clevis pins couplings
Welded connections

Springs

Compression spring
Tension spring
Torsion spring
Springs - 15 types

Tools and tables

Search for calculation, project
Conversion of units, tables
Technical formulas
Vehicle aerodynamics
External ballistics

 

User interface for the calculations
On-line software documentation

 

Tính năng của MITCalc

Engineering calculations MITCalc

• Integration of Extension Pack EP08 (Shells - Deformation and stress of rotational shells and pressure vessels)
• Support of AutoCAD
• Support of BricsCAD
• Support of Autodesk Inventor
• Full support for MS Excel (64/32 bit versions)
• Full support for Windows 8 and 8.1 (64/32 bit versions)

Deformation and stress of rotational shells (pressure vessels)

The calculation concerns solutions of pressure vessels and their components. The calculation solves deformations and curves of stress in rotational shells loaded with axial force, pressure, radial force and a bending moment. This program is intended for homogeneous shells of identical thickness and a single material. The calculation also enables solutions for connecting two shells of different parameters (thickness, material, dimensions...). The program enables:

• Calculation of cylindrical, conical and spherical thin-wall shells
• Calculation of a cylindrical and spherical thick-wall shells
• Calculation of a round plate
• Selection of various loading methods (joint, force, moment, rotational, load with fluid...)
• Calculation of deformation, radial shift, moment and stress in any point
• Visualization of charts with curves of the calculated values

Chính sách cấp phép

The MITCalc application (set of all calculations) is offered also in the form of subscription for one year. You, as the authorized user, will automatically receive:

• All new issued versions.
• All extensions (continuously supplied new calculations).
• All service packs.
• Technical support (e-mail).

The MITCalc calculation package pricelist.
Set of all calculations, 2D CAD support.
 Subscription for one year   69,- EUR
 Full license (without time limitation) 249,- EUR

 

The MITCalc 3D calculation package pricelist.
Set of all calculations, link to 3D CAD (SolidWorks, Inventor, Solid Edge), parametric models.
 Subscription for one year   79,- EUR
 Full license (without time limitation) 299,- EUR
 The "MITCalc for Creo" application can be purchased from COGRAS spol. s r.o.

 

Standalone calculations (only 2D CAD support)
 MITCalc Straight beams calculation 14,- EUR
 MITCalc Shaft design and calculation 19,- EUR
 MITCalc Profiles static characteristics 12,- EUR
 MITCalc Slender strut buckling 14,- EUR
 MITCalc Plates design and calculation 14,- EUR
 MITCalc Shells design and calculation 19,- EUR
 MITCalc External spur gear design 34,- EUR
 MITCalc Internal spur gear design 34,- EUR
 MITCalc Gear rack design 34,- EUR
 MITCalc Bevel and hypoid gears design 24,- EUR
 MITCalc Worm gear design 24,- EUR
 MITCalc Epicyclic gear design 34,- EUR
 MITCalc V belts calculation 14,- EUR
 MITCalc Toothed belts calculation 14,- EUR
 MITCalc Roller chains calculation 14,- EUR
 MITCalc Multiple pulley transmission 12,- EUR
 MITCalc Rolling bearings I SKF 24,- EUR
 MITCalc Rolling bearings II Inch 24,- EUR
 MITCalc Rolling bearings III INA FAG 24,- EUR
 MITCalc Bolted connection design 24,- EUR
 MITCalc Shafts connection key and spline 19,- EUR
 MITCalc Force couplings of shafts 19,- EUR
 MITCalc Pinned couplings 14,- EUR
 MITCalc Welded connections 24,- EUR
 MITCalc Compression springs 19,- EUR
 MITCalc Tension springs 19,- EUR
 MITCalc Torsion springs 19,- EUR
 MITCalc Springs 15 types 24,- EUR
 MITCalc Tolerances 14,- EUR
 MITCalc Tolerance analysis 29,- EUR
 MITCalc Technical formulas, Aerodynamics, Ballistics 12,- EUR

Liên hệ MUA MITCalc bản quyền

Quý khách hàng vui lòng liên lạc chuyên viên tại HCM, HN và các tỉnh khác hoặc qua email sales@pacisoft.com với thông tin đầy đủ và số lượng sản phẩm để có báo giá tốt nhất. Cam kết mức giá cạnh tranh và hỗ trợ tuyệt vời. Hotline (024) 3915 6886 hoặc (028) 36100 816.

Không có sản phẩm phù hợp với lựa chọn.