Mua bán phần mềm SharpCam bản quyền tại Việt Nam | Đại lý & nhà phân phối SharpCam - PACISOFT Vietnam
 hcm@pacisoft.com
 Hotline HCM 9:00-17:00 
(028) 36 229 885
 hanoi@pacisoft.com
 Hotline HÀ NỘI 9:00-17:00
(024) 32 028 112

SharpCam

Giới thiệu SharpCam

SharpCam được thành lập vào năm 2008 và là một công ty có trụ sở tại Anh, gần Guildford ở Surrey.

SharpCam được truyền cảm hứng từ cuộc cách mạng internet và là đứa con tinh thần của Julian Paphitis, người có hơn 25 năm kinh nghiệm trong ngành công nghiệp CNC.

Chúng tôi là công ty CAD / CAM đầu tiên áp dụng mô hình kinh doanh bán phần mềm chỉ qua internet. Ngày càng có nhiều công ty giảm chi phí và phụ thuộc vào các nhà phân phối, nhằm mang đến cho khách hàng một giải pháp hiệu quả hơn về chi phí.

Internet tiếp tục biến đổi thị trường và chúng tôi cảm thấy đã đến lúc ngành công nghiệp CAD / CAM phải tuân theo. Tốc độ kết nối Internet không ngừng tăng lên, do đó vấn đề hỗ trợ và sao lưu hiện nay rất thiết thực và thuận lợi trong môi trường này.

Các phiên bản của SharpCam

Phần mềm SharpCam là một hệ thống 2.5 / 3D CAM (Máy tính hỗ trợ máy tính) giá cả phải chăng để lập trình các công cụ máy CNC. Có sẵn trong ba phiên bản - SharpCam 2.5D, 3D và 3D Pro.

Chúng tôi đã xây dựng một giao diện để bất cứ lúc nào bạn có thể làm những gì bạn muốn, khi bạn muốn ... và hơn thế nữa, mã CNC được viết khi bạn đi, hoàn toàn được xử lý và sẵn sàng sử dụng. Nó đơn giản mà! Các hệ thống CAM, với bất kỳ giá nào, dường như luôn thua xa các đối tác CAD của chúng, chúng tôi không nghĩ rằng đây là trường hợp. Đây là nguồn cảm hứng đằng sau sự phát triển của phần mềm SharpCam.

SharpCam 2.5D

$526.00

SharpCam 3D

$712.00

SharpCam 3D Pro

$1315.00

An affordable 2.5 CAM (Computer Aided Manufacturing) system for the programming of CNC machine tools

An affordable 3D CAM (Computer Aided Manufacturing) system for the programming of CNC machine tools

An affordable 3D CAM (Computer Aided Manufacturing) system for the programming of CNC machine tools

Xem đầy đủ tính năng.

Yêu cầu hệ thống

SharpCam 2.5D

Hardware Requirements

SharpCam 3D and 3D Pro

Hardware Requirements

Minimum 1GB of RAM. Minimum 2.5 GHz Intel Pentium 4 (or equivalent) processor. Solid Simulation of large and complex parts may require more RAM and a faster processor. If unsure please download and install the demonstration version before purchasing SharpCam. This will ensure problems and disappointment are avoided.

Minimum 4GB of RAM. We have tested SharpCam 3D on PCs fitted with an Intel Core i3 processor with good performance. SharpCam 3D may well run on slower machines. Please download and install the demonstration version before purchasing SharpCam 3D. This will ensure problems and disappointment are avoided.

• Minimum Operating System Requirements
Microsoft Windows XP with service pack 2 or higher.

•  Minimum Operating System Requirements
Microsoft Windows Vista service pack 3 or higher.

• Supported Operating Systems
Windows XP service pack 2 or higher, Windows Vista, Windows 7, 8, 8.1, 10

•  Supported Operating Systems
Microsoft Windows Vista service pack 3 or higher, Windows 7, 8, 8.1, 10

• Operating systems not supported
Windows NT, 95, 98, Me, 2000

•  Operating systems not supported
Windows NT, 95, 98, Me, 2000, XP

• Server versions
SharpCam has not and will not be tested on server versions of Windows, but will possibly run on: Windows Server 2003, 2008

•  Server versions
SharpCam 3D and 3D Pro has not and will not be tested on server versions of Windows.

Other Requirements - All versions

SharpCam will run on 32 and 64 bit systems.
A mouse with a middle button and wheel is recommended, but not essential.
A monitor that supports a minimum resolution of 1280 x 1024 is recommended, but not essential. SharpCam will only run on a single monitor system and will not run on dual monitor systems.
Serial Port - if using SharpCam for RS232 communications:
USB to Serial Port adaptors - These adaptors are just not reliable enough and therefore do not meet the hardware requirements for use with SharpCam.
Laptops - are not fitted with a serial port anymore.
If the laptop is fitted with a PCMCIA slot (also known as PC Card) then a PCMCIA to RS232 Serial Port adapter is required. Ensure drivers are available for your version of Windows.
If the laptop is fitted with an ExpressCard slot, then an ExpressCard to RS232 Serial Port adapter is required. The adaptor should implement UART 16C750. Some adaptors are based on an USB interface and therefore do not meet the hardware requirements. Ensure drivers are available for your version of Windows.
Desktop - not all new computers are fitted with a serial port. This can be easily remedied by fitting a RS232 serial port card into a spare expansion slot.

Internet

An internet connection is recommended, but not essential. With an internet connection SharpCam can be automatically updated to newer versions.

Activation

An internet connection makes activation easier, but is not essential. If an internet connection is not available on the PC on which SharpCam is to be installed then access to a PC with e-mail is required. Also the facility to transfer files to and from the PCs is required.

Chính sách cấp phép

Single License

Mua bản quyền ở đâu?

PACISOFT có văn phòng tại Tp HCM, Hà Nội, Quy Nhơn, Đà Nẵng. Quý khách hàng vui lòng liên lạc chuyên viên của PACISOFT hoặc qua email sales@pacisoft.com với thông tin đầy đủ và số lượng sản phẩm để có báo giá tốt nhất. Cam kết mức giá cạnh tranh và hỗ trợ tuyệt vời.

Hotline (024) 3915 6886 hoặc (028) 36100 816. Xem thêm Lợi ích mua bản quyền

Thời gian giao hàng

Với nhiều năm kinh nghiệm, hợp tác toàn cầu với hơn 1000 nhà sản xuất, hơn 80% đơn đặt hàng được đội ngũ mua hàng của PACISOFT tiến hành giao hàng trong vòng 24-72h sau khi khách hàng ký hợp đồng. Xem thêm Top lý do chọn PACISOFT

Liên hệ tư vấn, mua bản quyền

• (024) 3915 6886 | (028) 3610 0816

sales@pacisoft.com

www.PACISOFT.vn/lien-he

www.PACISOFT.com

Không có sản phẩm phù hợp với lựa chọn.